Bed liner?

[J31Bro]

Anyone have any experience w/DIY bed liners? Looking to spend under $100 on the liner itself. Possible?

[evildave101]

i have used the dupli-color stuff before

https://www.napaonline.com/Catalog/CatalogItemDetail.aspx?R=DC_TRG250_0006446019

best bet for a thick layer is to use this to apply it...

https://www.napaonline.com/Catalog/CatalogItemDetail.aspx?R=DC_TRG102_0006446001

you gotta be sure to prep the area well - i did the inside of the heep and its peeling in some of the corners because i didnt prep it like i should have - i also used the spray cans on the heep - the spray gun puts it on thicker and you should give it 2 or 3 coats - its no rhino or line-x, but all in all, its not bad stuff...

[Hagabro]

I think for that price you would have to go with one of those brush on rubberized kits that comes in a gallon paint can. Is that what you are after? There are shops around here that spray on some liner but I am sure that is beyond 100 bucks.

[eus090474]

only used spray on for a sub box. it sucked

[J31Bro]

i have used the dupli-color stuff before

https://www.napaonline.com/Catalog/CatalogItemDetail.aspx?R=DC_TRG250_0006446019

best bet for a thick layer is to use this to apply it...

https://www.napaonline.com/Catalog/CatalogItemDetail.aspx?R=DC_TRG102_0006446001

you gotta be sure to prep the area well - i did the inside of the heep and its peeling in some of the corners because i didnt prep it like i should have - i also used the spray cans on the heep - the spray gun puts it on thicker and you should give it 2 or 3 coats - its no rhino or line-x, but all in all, its not bad stuff...

My paint guy owes me some favors for some 12v audio equipment I hooked him up with. He'll be stripping it down for me. :)

..but thanks for your input bromie.

[J31Bro]

I think for that price you would have to go with one of those brush on rubberized kits that comes in a gallon paint can. Is that what you are after? There are shops around here that spray on some liner but I am sure that is beyond 100 bucks.

I've got the manpower to do it. I can either spray or brush.. even roll. Doesn't matter to me either which way. Any are feasible. :)

[JimJ]

Line-X, yo. Don't be poor.

[evildave101]

there are also roller kits for the dupli-color, but i have never used them...

i have only used the spray cans and the air gun - air gun gave the best results - spray cans are good for smaller areas/parts...

[SAD]

Whatever you do.. Don't get Herculiner on your hootus...

http://www.explorerforum.com/forums/showthread.php?threadid=18595

One of the THE MOST epic threads on the internet evah /ofstory

[fbi90909]

Crazy glue and a p rock. All you need.

[J31Bro]

LOL